The MGA With An Attitude
WHEEL BRACE (Lug Wrench) - TF-160
![Wheel brace](pics2/wheel_brace1.jpg)
Original from 1956-1957
This is wheel brace (lug wrench to us yanks) that was supplied with all disc wheel MGA (not Twin Cam). On one end it has a 3/4-inch hex socket to fit the 7/16-inch fine thread lug nuts. On the other end it has a hook to assist in removing the hub cap. You can slip the small end of the largest tube socket (spark plug wrench) over the handle if you need more leverage.
![Orange crank handle](pics2/crank3.jpg)
This crank style lug wrench is from a 1962 MGA 1600-MK-II, after the switch to Shelly jack and more minimal tool kit.
|